Home › Forums › Tech Support › New wifi bridge › Reply To: New wifi bridge
February 1, 2016 at 11:54
#473
Bill B
Keymaster
To make the ESP01 or other in that family work, you will need to reflash the FW (you cannot configure the standard FW to work as it doesn’t support a ‘pass through’ mode on the serial*
Download this image https://www.communistech.com/blog/files/esp8266/firmware-1.0.0.bin You will need to set Telem2 serial port on the Pixhawk to 921600 i.e. SERIAL2_BAUD = 921
Updated: there is a newer version https://www.communistech.com/blog/files/esp8266/firmware-1.0.11.bin available now.
You can do this by connecting using Mission Planner or APM Planner 2.0
MAV Pilot Settings are 192.168.4.1:14550 UDP