1/2 connected

Home › Forums › Tech Support › 1/2 connected

Viewing 1 reply thread
  • Author
    Posts
    • May 13, 2015 at 18:23 #341
      Anonymous
      Inactive

      I bought MavPilot several months ago but never could get it working right. it’s odd because it does see when I change modes or arm the copter but most of the data like gps and altitude is missing. If I arm the quad I suddenly get the voltage. So it’s like I’m 1/2 connected. I am using a wifly module and UDP as suggested in one of your older links. It seems to work okay with DP so I think it has to do with the network ISP or something. I’ve tried different ISP addresses including the one my iPhone says it connected to. Any idea’s? Thanks
      Rick

    • June 8, 2015 at 09:35 #345
      Bill B
      Keymaster

      Hi,
      Could you describe which system you are using? I’d like to help you get that working as expected.
      Thx
      PS: sorry for the delay in replying

      • This reply was modified 9 years, 6 months ago by Bill B.
  • Author
    Posts
Viewing 1 reply thread
  • You must be logged in to reply to this topic.